Glass Crafts: Page 3

Check out this video to learn how to use the Diamond Tech Power Max bit and disk grinder to smooth and grind glass for use in mosiacs and tiffany lamps.

Check out this video to learn how to mix grout for use in direct mosiac projects.

Check out this video to learn how to use the power miter came saw to cut lead,copper, and brass came for stained glass projects.

Check out this video to learn how to use the Power Max 2 grinder from Diamond Tech to grind rough glass edges for mosiacs and stained glass projects.

Check out this video to learn how to use pattern shears to cut pattern for your next stained glass project.

Check out this video to see how to score and break glass tiles for making mosiacs or other craft uses. This video demonstrates using the Diamond Tech 2in1 scorer breaker tool.

Watch this video to learn freehand glass making techniques to catchy music. See how to use fire in a bending technique. Break the glass under a flame, put it back together, separate it, and clamp it to form a flat object. (You know how the patience process goes . . .) Learn how to make a pendant or an earring.

Check out this video to learn techniques for making glass with fire. Enjoy the Pink Floyde tunes while you are at it.

Here I use lampworking to make the classic plunge dot bead. I use COE 104 soft-glass - dark purple, light purple, periwinkle and clear. Under 10 minutes with seconds to spare... Whew.. Enjoy!

This is simple way to make a flower pattern on a bead. I use COE 104 "soft" glass. Watch this lampworking video!

This is a layered bead with a little swirl added to each end for a ocean wave effect, using COE 104 glass. Learn this great lampworking technique!

This is a lampworking demo of how to make a bead that has a tie-dyed look. Ross used soft-glass for this bead.

This lampworking video will show you how to make a marble out of rods of glass.

We make a dragon scale bead for your necklace. Learn the lampworking process.

Watch this lampworking video series to learn how to make a glass blue tubing enclamo pipe. This style of pipe is nice because of the way it lays down - it doesn't look like a typical pipe.

Watch this lampworking video series to learn how to make a glass pendant with i/o frit dot on dot design. Frit is ground up glass rods. It comes in a few different sizes including powder form.

Watch this three part lampworking video series to learn how to make a glass pendant with an internal twist with dichroic on both sides.

Watch this three part lampworking video series to learn how to make a flipped honeycomb glass pendant. You fume with silver and make a honeycomb. Then use the backside for the pendant.

Watch this two part lampworking video series to learn how to make a silver fumed glass pendant. The directions and visuals are clear.

This video demonstrates how to make a glass hummingbird bead with the lampworking method. Watch for efficient instructions and a very clear view of the process!

Learn how to bend glass fusing stringers in this video. This is a great demonstration for those interested in stained glass, lampworking or other glass projects.

Watch this video to learn how to cut circles in glass. This is a detailed demonstration for those who are interested in stained glass, or other glass projects. You must have glass cutting tools.

Watch this three part lampworking video series to learn how to make a dichroic glass pendant. Dichrotic means two colored. Cut up a piece of backed dichro and use tweezers to shape it. This pendant is easy and quick to make!

Watch this four part lampworking video series to learn how to make a glass honeycomb pendant with air bubbles. This is a good sized pendant, using amber purple and then backed with turbo cobalt. Demonstration and instructions are clear.

Watch this video to learn how to melt drops of solder onto stained glass, a soldering copper foil technique.

Watch this video for a quick demonstration of burnishing and filling gaps, a soldering copper foil technique.

Watch this video to learn how to cut glass along a curvy score line using a hand tool.

Watch this video to learn how to score a piece of glass and break it with your hands.

Watch this video to learn how to do this unusual goblet-making technique used in the middle ages.

Watch this video to learn how to do various cold-working glass cuts using a lathe.

Learn about making ice glass with experts from the Corning Museum of Glass.

Learn about grinding glass using various methods with experts from the Corning Museum of Glass.

Learn about goblet making using pre-made parts stored in an annealing oven with Bill Gudenrath from The Corning Museum of Glass.

Learn about creating an air twist stem on a goblet with Corning Museum of Glass experts.

Learn how to make a glass goblet with Corning Museum of Glass experts. Building glass goblets began with Roman glass makers.

Learn how to fuse and slump glass with Corning Museum of Glass experts. Fusing and slumping are two techniques that have been used for centuries, and can be used together or separately.

Learn about enameling with Corning Museum of Glass experts. Enameling is a popular decorative technique used around the world.

Learn how to make colored glass with Corning Museum of Glass experts. Some glass is colored by the addition of a metal oxide, while other glass is colored by adding color to the surface in a variety of ways. This video clip covers five different ways to color glass.

Learn how to make cameo glass with experts from The Corning Museum of Glass. Cameo glass consists of two or more layers of colored glass, with the outer layers carved away to produce relief decoration.

Watch this demonstration of the making of a glass bowl with a Roman foot. This is taught by experts from The Corning Museum of Glass.